OJD Homes
Home/Guides/Extensions

How much does it cost to knock through a wall? 2026 guide

What a knock-through for open-plan living costs, what sits inside the price, and when building control and party wall notices come into it.

15 November 2026 · OJD Homes Ltd

The cost

Removing a load-bearing wall and putting in a steel beam typically costs £4,500 to £12,000 plus VAT in Cheshire in 2026. That includes the structural engineer and building control, the steel, the temporary support, and making good so the room is ready to decorate.

The lower end is a short opening between a front and back room in a terrace or semi, with a steel that can be carried in by hand. The upper end is a long opening across the back of a house, a heavier steel that needs lifting gear, a wall carrying a floor and part of the roof, or moving radiators, sockets and switches out of the way.

A non-load-bearing stud or block wall costs a fraction of that, because there is no engineer, no steel and usually no building control. Most of the cost is labour, rubbish removal and making good the floor, walls and ceiling where the wall stood.

Is the wall load-bearing

Do not guess. Clues include floor joists running across the wall above, a wall directly above it upstairs, or a wall that is solid brick or block in the middle of the house. But only a structural engineer, or a builder who then has it checked by one, can say for certain what the wall is carrying.

What the price covers

  • Structural engineer: £400 to £900 for the calculations, which size the beam, the padstones and the support at each end.
  • The steel beam, delivered and fitted, usually with fire protection such as plasterboard boxing or intumescent paint.
  • Padstones: concrete or engineering brick blocks under each end of the beam that spread the load into the wall below.
  • Temporary support: adjustable steel props, known as Acrows, with needles or strongboys to hold up the wall and floor above while the opening is made.
  • Taking out the wall and removing the rubble.
  • Making good: plastering the beam and the reveals, patching the ceiling, filling the gap in the floor, and moving any electrics or radiators that were on the wall.

Ask whether the quote includes flooring across the old wall line. Two rooms with different floor levels or coverings may need new flooring throughout to look right.

Building control and party wall

Removing a load-bearing wall is building regulations work. Building control checks the engineer's design and inspects the steel and padstones before they are covered up. At the end you get a completion certificate, which a buyer's solicitor will ask for when you sell.

If the beam bears on a party wall, which is common in semis and terraces, the Party Wall etc. Act 1996 applies. That means two months' notice to the neighbour, and if they do not consent, a party wall surveyor. Typical surveyor fees are £1,000 to £2,000 per neighbour, paid by you.

Check fire safety too. In a house with a loft conversion or three storeys, the hall and stairs are usually a protected escape route. Opening a room onto them can affect that, so building control needs to see the plan.

Chimney breasts

Removing a chimney breast is also structural work. If the stack above is staying, it has to be supported, usually on a steel beam or brackets designed by an engineer, and building control needs to approve it. In semis and terraces the breast is often built into the party wall, so notice is needed. Check whether the neighbour's flue shares the stack, and cap or ventilate any flue left in place.

How long it takes

Most knock-throughs take one to two weeks on site: a day or two to set up props and open the wall, the steel in and inspected, then plastering, drying and making good. Allow time before that for the engineer's calculations, building control approval and, if needed, the party wall notice period.

Next step

We look at the wall on a site visit, arrange the engineer and building control, and give you a fixed price in writing with a line-by-line specification and a programme.

About OJD Homes

OJD Homes Ltd is a building and property development company based in Northwich, Cheshire. It builds house extensions, loft and garage conversions, full renovations, kitchens, bathrooms and new builds across Cheshire, with a fixed price after a free site visit, and also buys probate, run-down and damaged houses for cash.

Building cost calculator

Services

Home extensionsLoft conversionsRenovationsGarage conversionsStructural workKitchens and bathroomsNew buildsLandlord refurbsInsurance repairsProbate sales

Builders by town

Builders in NorthwichBuilders in WinsfordBuilders in MiddlewichBuilders in KnutsfordBuilders in CreweBuilders in NantwichBuilders in ChesterBuilders in WarringtonBuilders in MacclesfieldBuilders in WilmslowBuilders in HartfordBuilders in SandbachBuilders in FrodshamBuilders in TarporleyBuilders in Holmes Chapel

Guides

How much does a loft conversion cost in Cheshire? 2026 pricesGarage conversion cost and planning: what you need to knowThe Party Wall Act explained for extensions and loft conversionsBuilding regulations for extensions: what you need to knowHow to choose a builder in Cheshire: checks before you signHow much does it cost to knock through a wall? 2026 guideSelling a probate house in Cheshire: the executor's step-by-step guideCan you sell a house before probate is granted?All guides →
Call 0333 038 3134Free quote